Samsung ML 2010 Laser Printer "drum jammed force" Questions

...force it manually by moving the green cylinder (the drum) on one the border gears. DO NOT touch the drum or you will make a permanent mark on it. If the printer works for a while an stops again, ...

drum. It seems that, for no apparent reason, significantly more force is being applied to picking up a sheet of paper from the paper tray. However, nothing seems amiss when looking at the central feed

...jammed paper. Just to make sure, remove the toner from the drum by holding down the tab on the side and lift the toner out. Look for any small piece of paper inside of the drum unit. Reinstall the ...

...jammed paper by removing the drum and toner inside the printer. First Open the front cover, just pull down the cover right above the brother logo. You will see the handle for the drum and toner. Hold ...

...jammed paper seemed to be 'stuck' to it. It came out easily, with no real force required. I removed the paper and slid the drum back into place. Quite simple once I could see how to do it without ...

drum to remove the jammed paper inside Hi Good day!! here are the steps how to remove paper jam in brother hope it help's you!! 1. Pull the paper tray completely out of the printer. 2. Pull the jammed

...front cover of Printer, remove the drum and toner with force and put aside. Remove the jammed paper slowly so it doesnt rip. If you cannot find the jammed paper check in the back cover and paper

...jammed. You need to then replace the toner/drum unit, it will slide back where you took it out from. It may be difficult to push, you need to add a little force and it will go back into place. Close ...

drum unit assembly. Pull the jammed paper up and out of the printer. If you cannot remove the drum unit assembly easily at this time, do not use extra force. Instead, pull the edge of the jammed paper

...drum unit assembly. 4. Pull any jammed paper up and out of the printer. Do not remove the drum unit assembly with additional force at this time if you cannot remove it easily. Instead, pull the edge ...