...cartridge, this process will give you significantly better result. In my case the ghost repeat vanished. But a few micro dots can be seen if you take a very very close look. Good luck for all who may ...
...drum (which is part of the print cartridge). and the other possible one is on the fuser. If I were you I would first try a new print cartridge (part# 310-7945) which is most likely. If that ...
...cartridge. It fills it up but doesn't use any when printing. Any ideas?? Thanks Erid It sounds like the problem is either the drum or the megenta developer assembly. The drum is a consumable you can ...
Question about Samsung SCX Office Equipment & Supplies
...unprinted lines on word docs when printing - why ? It is cause of Error On Drum Roller of Your Printers Ink Section or in Cartridges. You have to replace it to resume good printing.Hope You
Question about Xerox Office Equipment & Supplies
...I can not use it till it clears up. Have shut it down and the computer several times. Any words of wisdom??? Steve Hello sir; Just replace drum cartridge, it will take care your problem. GOOD
...and now I replaced the color cartridge (with an older one that was not empty) and still no color print (testing using Word). Any ideas? Thanks - D plese clean your printer drum unite clean wast ...
Question about Dell Office Equipment & Supplies
...drum was a duff new one, (or not replaced) when the cartridge was remanufactured. An original drum in these cartridges is a purple colour, aftermarket drums are blue, green, or blue-green. The only ...
...drum cartridge. Your first step is to see if there is a corona cleaner that slides back and forth and make a test print. If you don't have that, or if that doesn't solve the problem, put the toner ...
Question about Dell Office Equipment & Supplies
...drum can be replaced. The new part from Dell is apprx. $50.00 US. http://accessories.us.dell.com/sna/products/Printer_Accessories/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=310-8710#Overview You ...
drum surface. If there is, do the following. If not, go to step 3. Check to see if the cartridge is correctly installed. Check to see if the transfer roller is correctly positioned. 3. Check to see if
283 questions posted
Usually answered in minutes!
1,017 Questions
482 Questions
305 Questions
287 Questions
119 Questions