Samsung SCX-4100 All-In-One Laser Printer "power button copier" Questions

...power button, unplug the power cable. Wait for 10 to 15 sec. then turn the machine on. Try pressing the menu or setup button. If that works thats good but if not you may need to call the machine ...

...from the wall outlet then press and hold the power button for 10 secs. If same thing will happen then you need to replace the main power board and the fuser of the machine. Thank you for using

not working. It sounds like you may a button stuck down. This will prevent any of the others from working. i presume you have power and when switched on the machine makes its usual start up noises etc

samsung scx-6122fn when turned on displays system initializing with no progress & all buttons stay green simply unplug the power and turn it on again

...up cd and a usb. All seemed to set up ok, but I cant get anything to print - am i doing something stupid?! hi, there is a small button at the back that you need to switch on to get is power on. ...

...power button). Beware, that you don't touch the coil/metal there with bare fingers, as it might give a shock!!! If the fuse is not the problem. 3. (unlikely but still worth a check) Check that you ...

...power up the printer, hopefully the error will be gone. Hi There, According to the Online Troubleshooting Guide here: ...

...power button for about 5 seconds; light will start to flash and when it begins to flash even faster let it go. This will print out the Configuration and Network Report.Locate the IP address on the ...

scanners locked press "clean-delete" (yellow button) ten seconds.And turn off the power switch and take the cable off.wait for 2-3 seconds. then start it again.

...power button...only ear some bip's. Front panel shows nothing.nothing works. Help me please. This is a sympton that a key may be stuck down. Usually the lcd is not affected but I feel sure you ...