...SCX-3405W consistently makes two creases at the bottom of the paper, each crease has four circular dents in it. Is there any way to fix this? I have the same problem with my
...it was poorly loaded paper. Take the stack of paper out and turn it around so you have no dings or dents on the inward facing side. You need to make sure that the paper is stacked evenly. Good luck. ...
Question about Samsung SCX Office Equipment & Supplies
Printed paper is dented at regular intervals as if embossed. There is toner in the dented areas. The dents are consistent in shape and location. Printer dents paper. You will want to call a tech or ...
...there is a dent then that's probably the problem.look where dent is on paper and that is where you should look for the piece that's causing the jam,if that does'nt solve problem i would need more ...
...dent in the paper same direction as paper travel. to remove the fuser you will need a small offset phillips #2 screwdriver and some patience. 1. pull platen to left to acess upper cover screw, remove ...
...dent in paper I am having a problem with a small dent appearing about half way across the page and it repeats about every 4.5 inches vertically down the page. The dent is small, about 1/8 inch ...
Question about Samsung SCX Office Equipment & Supplies
Printed pages are dented as if embossed at regular intervals. The dents are consistent as to shape and location. Printing appears in the shapes as required. Printed paper is dented This is caused by ...
dents and smears there is a roller in the copier that leaves dents all the way down the center of the page. how do I get to the roller that might be the problem and adjust it. I think it happens after
Question about Samsung SCX Office Equipment & Supplies
...edge of the paper will get a little dent in it where it hits the obstruction. see if the jammed paper has a dent on the leading edge. It will be at the point where the obstruction is in the
paper there is a dent on the leading edge which seems to indicate an obstruction about 60mm from left hand side stopping left hand side of paper feeding in. the feeder wheel is fine, what do you think
352 questions posted
Usually answered in minutes!
1,017 Questions
482 Questions
305 Questions
235 Questions
119 Questions
