Question about Samsung CLP Office Equipment & Supplies
Transport rollers need to be cleaned Would like instructions for cleaning the fusion rollers and wipers. The transport rollers in the Samsung CLP-300 can not be removed and are hard to even access. ...
...have type ghosting My printouts have light ghosted imprinting of previously printed pages. The red rollers in the fuser have the same imprinted sections. Do I need to clean these red rollers? Dose ...
Question about Samsung CLP Office Equipment & Supplies
...paper tray, after several reloads, printer runs for 1 min, then shuts down (red status light), all rollers are clean, a jam did not start this problem it just quit feeding paper in. I understand the ...
HI HOW CAN I CLEAN THE ROLLERS? BUT HOW CAN I CLEAN THE ROLLERS? THANKS Paper feed rollers? use WD-40. Spray on wipes, away from printer- and just wipe the feed rollers from side to side. Doesn't need
Question about Samsung CLP Office Equipment & Supplies
Samsung clp-500 paper feed roller replacement - how to... There are 2 tires on one shaft and a spring. Releasing the white clip on right hand side (like HP) does nothing useful. I expect I'm going to ...
constant paper jams, cleaned printer out, cleaned rollers, used to jam on pick up rollers but now jams on output rollers..getting fed up so reverted to expensive inkjet printing for now. fuser is ...
...feeding I have loaded the tray with paper not full to top of tray. adjusted the size, yet when the roller seeks to grasp paper for printing, the roller does not feed into printer Try replacing the ...
Pickup Roller wear It appears that many of the problems with this printer are related to the Pick-up Roller. My printer was producing paper feeding errors and I found that the roller on was worn ...
Question about Samsung CLP Office Equipment & Supplies
The paper is not feeding into the printer. I think there is a problem with the rollers. If the paper does not make it out of the paper tray, this will be a pickup roller issue. This is the roller that
Question about Samsung CLP Office Equipment & Supplies
...problem with both this and the Xerox phaser 6110 (a rebadged Samsung) It is due to the pickup roller "tyre" that is the rubber roller that pulls the paper from the tray. It gets shiny and slips ...
284 questions posted
Usually answered in minutes!
951 Questions
374 Questions
108 Questions
110 Questions
74 Questions