Samsung SpinPoint P80 SP0802N 80 GB Hard Drive "jumper" Questions

...won't boot when sv8004h is connected on as a secondary drive on the primary ide cable Check the jumpers (Little connector which connects two pins together) at the back of the drive, your second ...

... how do I set the pins, master, slave or cable? Thank you If your using an external drive case, the jumper pins should be set at "single". If that doesn't work you can try moving the jumper till the ...

...cable. 4. Check the hard drive documentation or the label on the drive itself for master/slave jumper settings. 5. Find the jumpers on the circuit board of the drive. Jumpers are plastic plugs ...

Samsung SP0802N if I do not use any jumpers it does not start. However if I p[ut one jumper in any position I have to press F1 to satrt!!!??? Check and insert jumpers accordingly as mentioned on the ...

jumper settings when used as a slave in a HP pavilion 6835 There are 3 pairs of pins: * MA(ster) * SL(ave) * C(able)S(elect) Move the jumper to connect the two 'SL' pins, if you want to use the drive ...

...on the drive. If there is you can change and delete partitions on this drive as well. Check the Jumper pins There should be no jumpers for 80 gb slave Adding a jumper on this drive reduces the ...

wHAT ARE THE JUMPER SETTINGS FOR THE SLAVE CONFIGURATION FOR SP0802N In a general slave configuation, there is no need for a jumper.

jumper setting for hard drive Dear Friend, To make Master Hard drive Look here..To make Slave unplug jumper from the Hard drive..... Hope this Helped you..Thanks for Contacting FixYa...

Master jumper settings for sv1204h i'll try to explain with a scheme: :::: These are the pins, you need to put the jumper like this: [:]:::

I want to use my old SP4002H as an external backup with it installed via a USB firewire cable. What to i set teh jumpers for (Master or Slave) once i find some jumpers? put it on Master