Samsung (SP0411N) 40 GB Hard Drive "jumpers" Questions

Jumpers Serttings on Quantum HD Where are the jumper pins and what are the slave settings. Only jumper I found has ..CS..DS..and SP. Right now the jumper is on the DS pins. Thanks! Nick CS = Cable ...

How to set jumpers in an old quantum fireball Lct20 HD. The master mode needs to be "jumpered" Please look on top of your HD and u will see a table that show u the HD jumper setting (Master, Slave or ...

...do i configure this hard drive for a 'slave' ? You need to set the drive as a slave by moving the jumpers the the correct pins. You should see 4 sets of pins, for slave you put the jumper over the ...

...for a Maxtor harddrive. I want to make it a slave in another system. I just need to know where the jumpers need to be placed usualy its just one jumper if no jumper on maxtors becomes slave. jumper ...

...poster of Maxtors jumper settings for each kind of drive. Serial ATA drives don't need master/slave jumpers. You can choose "computer select". In fact, you should be a ble to run an ATA drive with no ...

...1 for on, no jumper for off) The off in this case was of course slave. The result being, no jumpers -

...setting using only one jumper ( only eight pegs to place the jumper on) could it be that i need two jumpers? i googled it and a few sites showed examples of maxtor jumper settings but the pictures ...

What is the jumper pin placement to make a slave of a DiamondMax Plus 9, 80GB hard drive? The manual is linked below and section 3.3.1 covers jumper settings. The slave setting shows the park position

jumper settings current backup hd has jumper on top/bottom of #1 pinm abd jumper from top of #2 to top of #3, had been working as backup to c: drive, I want to make it as master. Where can I find a ...

I want to add another hard drive and need to know how to set the jumpers on my maxtor 90645d3 please help.ty if you want to boot from this drive, please set the jumper to the master position. if this ...