Samsung SpinPoint P80 SP1604N 160 GB Hard Drive "format harddisk ide" Questions

ide cablei also have just that one hdd. Hi, you aint lost 20gb. 1mb is 1024 1gb aint 1000mb for a example i have a 40gb hard drive here, it displays 34.3gb 200gb hard drive is usually 186gb its normal

...format, partition or delete anything (after reboot the partition or files is the same before) on may harddisk drive, and i have test my harddisk with many hdd utility but no error found on this disk ...

...harddisk you will need to format it. go to the start menu and right click on "my computer" and select manage. Then find "disk mangagement" in the left panel. find the new drive and right click on it ...

...harddisk is detected but when ever i format it or try to install os it does not get detected a message comes please switch on the harddisk try replacing all the leads that attach to your hard drive ...

...harddisk is sata WD1600BEVS Go to Control Panel > Administrative Tools > Computer Management > Storage > Disk Management (Local). Choose Drive 0 and right-click on it. Choose "Mark ...

...harddisk still its not booting from hard disk.plzz help More than likely, since you say you did a DOS install of the OS, you did not set the FDISK parameters to set your primary drive. Insert the DOS ...

...Dreamweaver from Net. after restarting me PC the Hrddisk show lots problems some time it does not formate, sometime window become corrupt and some time it sounds unusual and some time it take very ...

...system using IDE MAXTOR harddisks have a DMA problem and can not be activatet anymore i like to formate to the factory initials but i have not the program can you please advise me ? I really do ...

...harddisk then check. If your HD has a bootlog and you didn't change its format from FAT32, go into CMOS and change the startup settings to boot from the C drive. If you don't have a viable bootlog on ...

harddisk my segate 40gb hdd is not detect Check the jumper settings on the back of the drive, if this is the primary HD, set it to master, if secondary, set it to slave, if secondary still does not ...