Precor 932i Treadmill "designer 1 reset buttons" Questions

reset to 0, but was working properly) right now, it still have the same problem & only work the 2 button. The stop button, incline+/-, speed +/- bottons do not work nor the fix speed buttons, only

...reset switch on the bottom of the treadmill near the power cord. If it has tripped, the top of the switch will protrude. Wait 5 minutes then press the switch.2 Check that the power cord is plugged in ...

Reset" position, which will be labeled.2.   Reed Switcho        1 Unplug the treadmill and remove the safety key.o       

Reset" position, which will be labeled.2.   Reed Switcho        1 Unplug the treadmill and remove the safety key.o       

Reset" position, which will be labeled.2.   Reed Switcho        1 Unplug the treadmill and remove the safety key.o       

Reset" position, which will be labeled.2.   Reed Switcho        1 Unplug the treadmill and remove the safety key.o       

...1) Try to reset the c. breaker in your treadmill.2) Inspect if your see some loose wires.3) Open the keypanel and tight the flexible cord or ribbon cables.4) Tight the connector coming from display ...

...RESET, SPEED , SPEED , and SPEED . (Numbers on the display appear in sequence: 4, 5, 6, 5, 1, 5, 6, and 5.) Note: You must sequentially press each key within 4 seconds of each other or the display ...

Reset" position, which will be labeled.2.   Reed Switcho        1 Unplug the treadmill and remove the safety key.o