...it's stpe working, yesterday was working fine but today is not, i try to reset it but no avail, the M1 amber light keeps flashing all the time, as i said, i try to rest it,i disconnected, try ...
...it in. Continue to hold the reset button. Step 4 Watch the lights on the front of the gateway. The M1 & M2 should come on solid. When the M1 & M2 begin to blink slowly, release the reset ...
...M1 and M2 flash at the same time.) 5. After you have completed the above steps, the router will be reset to the factory default settings. then : Shutdown your PC. Unplug the power from the router and ...
...cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then ...
m1 and m2 ligth is up whitout cable. I tested reseting the router to original factory, but this didn't work. please help thanks Can you tell me the setup with your router? It should be Internet->Modem
12 questions posted
Usually answered in minutes!
1,082 Questions
984 Questions
709 Questions
641 Questions
532 Questions
