laptop to the router you may have better luck setting it up. The other thing is maybe you are not properly connected to the router. If you go to Start-->Run then type CMD and you will get a command
...laptop before you start changing security settings. Go back to your router's web page and set up wireless security. Don't use WEP - that is not secure enough - use WPA or WPA2 if you wireless network ...
Question about NetGear Computers & Internet
...start 2. run 3. type cmd 4. it will show a dos prompt 5. from the dos prompt type ipconfig/all 6. it will list the ip address, subnet, default gateway, dns server this settings should be type in to ...
Question about Linksys Computers & Internet
...laptop before you start changing settings. Get a manual for the router here. Go back to your router's web page and set up wireless security (don't use WEP - that is not secure enough) Once you're up ...
laptop before you start changing settings. Get a manual for the router here. Go back to your router's web page and set up wireless security (don't use WEP - that is not secure enough) You will have to
laptop does see the signal, and indicates the signal strength but cannot log on; getting stuck on "Acquiring IP address," and then going to "Limited or no connection" message... and that is it. I have
103 questions posted
Usually answered in minutes!
2,767 Questions
2,074 Questions
1,822 Questions
1,740 Questions
1,432 Questions