2004 Proton Gen-2 "gearbox selector" Questions

...gearbox or it may just be a missaligned gear selector in the gearbox, it will be expensive whatever the problem is ........unless the auto-mechanic is your best ...

...gearbox selector spring for a Proton Savvy 1.2 manual. That sort of information is not available. If you want that, you would have to contact the factory, find the design team and get the archived ...

...a selector gear cable or internal gearbox syncro problem did not think the shift stick goes direct into the gearbox gear selector inspection remove the console around it see if the bushes are ...

I can only get reverse on my fiat punto what do you think is the problem Selector arms come off from gear stick to gearbox or gearbox internal selector fork problems

...off a 13nut? if so the selector under this nut dropped into the gearbox and its not lined up properly u need to remove the top of the gearbox and allign it.takes some messing around to get it ...

...selector enter gearbox. The rubber over it looks still new. Is there a seal that be replace, and what is the sparepart name. it a gasket [selector cover ] just order using yr make model and ...

...gearbox selector housing - if it's a manual of course. I think you will have to remove the gearbox selector housing to enable this. Be also careful of wiring for different switches and the like. I ...

...correctly and that non of them have too much movement in either direction. Also ensure that the linkages are not crossing over up to the gear lever selector or on the gearbox selectors. Thanks ...

...gearbox then manualy put the gear selector in park position then ajust selector linkidge so that it will go back on without pulling the gear selector out fom its position,if it dose not pick up park ...

...selector inside the gearbox is worn and needs replacing if this is the case then it would be cheaper to get a reconditioned gearbox as repairing it would cost about the same as a recon. If you need ...