2005 Nissan Almera 1.5i "crank sensor" Questions

crank sensor for nissan almera 2005 1.6 engine. where is the crank shaft sensor situated . probably in the distributor

...volts and the grounds but no pulse the the car has 2 sensors, one is the cam and the other is the crank. those sensors provide pulse to one for the injectors and the crank is for the coil packs.

...crank sensors, fuel pump, fuel pump relay, battery. Fuel getting to spark plugs, engine tumbling but there seems to be no electricity to coil packs Code 345 means the cam sensor on bank two is not ...

...is not seeing registered key. does the car have security light?? if so, look at it while you are cranking the car. if its on steady, then the car is "locked out" by the NISSAN immobilizer. Also

...whilst driving? The engine light battery light comes on run the fault codes and look for cam/crank position sensors. faulty or loose connections may cause this fault. If you have more than 1 ...

Nissan Almera wont start with code P0345 Replaced cam and crank sensors, fuel pump, fuel pump relay, battery and ECU. Fuel getting to spark plugs, engine tumbling but there seems to be no electricity ...

...crank sensor on a 2009 Nissan Titan v8 truck? Try to start the truck, it will crank but not fire, mechanic said it's a crank sensor but need it's location on the truck i think it's the starter. On ...

...crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor?? Nov 2, 2011 SC400 Crank Shaft Position Sensor. WHERE????? Oct 11, 2011 SC300 No Spark Oct 2, 2010 ...

...Crank shaft sensor. p 335 is the CRANK shaft position sensor --circuit malfunction-- ===causes wiring---crankshaft position sensor by replacing the CAM shaft position sensor you have replace probably ...

...crank sensor sends the signal to the coil, i would check it next CHECK THE CAM SENSOR AND CRANK SENSOR!! hi thies car are know for crank sensors if you have a volt meter unplug the crank sensor and ...