2006 GMC Envoy Denali "vehicle pulls right braking" Questions

pulls hard right when brakes applied. changed calipers and pads no change. flushed and Bled system. Have you had the OBD codes read ? Does vehicle have ABS ? Obvious but are the tyre's ok , tread ,not

...right. As a result my mechanic ran a compression test. The 6th cylinder is only putting out 80lbs of pressure where as the rest were putting out 195lbs (factory says it should be around 215lbs). His ...

...pulls left. Right side Caliber and hose was replaced. Problem remains. Inspection of right and left side brake indicates no visible problem. Slow braking does not always pull to left. Hard braking ...

...right? Driving, braking, accelerating? First check your Brakes. This a common cause for 'pulling'. Brake systems can either 'Stick On' causing the vehicle to pull while driving, or 'Seize' causing it ...

...vehicle starts jumping and pulling to right before stopping. Very scary because it takes awhile before it actually stops. I must start stopping about 6 car length before the person in front of me and ...

...vehicle 'pulls' to the left or right it usually means one of the brake calipers isn't working correctly. It usually pulls to the side that is working better. So pulling to the right means you have a ...

...vehicle pulls while driving there a couple of things you can check. 1) Inflate tires to manufacturers specification. 2) Raise the front end of the vehicle and compare the amount of rolling resistance ...

...pulls to the right really bad when braking i have changed calipers rotors,pads,ball joints,rear shoes and brake cylinders and i have had it aligned can anyone help Make sure the rubber part of the ...

...pulls quite violently to the right when i brake (even at low speeds),i have replaced the brake rotors,pads and shock absorbers with new and bled the brakes countless times but the problem is still ...

...the vehicle pulls tells me, that side is working. The other thing I would check is a collapsed brake hose going to the caliber. You can't tell by looking, you have to take it off and blow through