Fisher and Paykel Aquasmart wl80t65c "replace tub bearing" Questions

tub bearing is mounted in the middle of the outer tub. The tub bearing helps to keep the inner tub spinning smoothly. Replacing the tub bearing is a very involved repair and will require disassembling

...Tub to replace the Outer Tub bearing .....ain't that just peachy.....good job Maytag design team. If you are the original owner I would press Maytag hard to replace the Outer Tub based on the Outer ...

...replace the Tub Seal you need to remove the spinner assembly. That means you have to remove the outer tub. A bigger job but several on this forum have completed it including myself two weeks ago on a ...

...replace the tub which has a bearing on it. Can it be repaired easily or is it a major task? How much is the replacement part? Thanks It is not a hard job to replace the tub. Just time consuming. I ...

...replace the tub bearings in your laundry center, model# LGH1642DS0. Typically, this is not a do it yourself repair. There are no manuals that will guide you in replacing the tub bearings. I suggest ...

...tub shell assembly. Normally need to replace the inner basket/shaft assembly and the outer shell with the tub bearing. check out for this link ...

...bearing without replacing the whole outer tub? My bearings went out too and I found this site http://www.neptunebearing.com/ Ordered the bearings and the Tony Tool. My son and I replaced the bearings ...

...to replace just the bearing in the tub. If the bearing is bad the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing