...clean the battery cap and contacts with a pencil eraser including cap threads. the aperture mirror is located on front of the prism. remove the two screws on the front prism cover, remove the cover. ...
prism plate and clean gearing, oiling and greasing for coupled range finder. Every thing appears to work fine. Have begun to remove top plate. All parts needing removeing have been done excepting film
prism to be sure there is no broken circuits from impact damage not visible from the top cover .clean the battery covers and contacts. now the led's should light and the shutters fire. if the shutters
...prism which has LEDs to be lighted. I also used an ohm meter to check out continuity- everything seemed to be in order. I then cleaned all the contacts including the battery terminals withl alcohol ...
...Clean the contacts on both sides and see if this helps. Another test to see if it's getting voltage from the battery is on the body contacts(on top of the body where the viewfinder slides on). Take a ...
...Clean, Lubricate, Adjust) which for a camera in non-professional use will often see it through a few more years, but I'd recommend getting a CLA done annually if you're well off and every couple of ...
27 questions posted
Usually answered in minutes!
7 Questions
5 Questions
1 Questions