Lowrance LC X-15MT Sonar "readings" Questions

Ad

What do I have to do to get proper depth readings on my hummingbird 561. Instead of reading 4ft it reads 08 read the user manual as to how to calibrate the unit remember that it reads the distance ...

Ad

I have a E22078 Wind Vane. How do I check the wiring continuity at the cockpit without climbing the mast? Can I use a multimeter to read impedance up to the wind instrument? You can read the ...

Ad

My depth finder loses its depth reading at about My depth finder (Piaranha max 170) loses its depth reading at about half speed of my boat You need to set the transducer lower. When at speed, the hull

why does my lowrance elite 5 not read bottom when boat is moving does not read when moving going up our channel to make no wake it reads properly If the unit reads bottom sitting still but doesn't ...

Question about Lowrance Boating

1 Answer

lowrance troubleshooting Elite 4 depth readings occasion way off Pay attention if depth readings shift during times when moving from spot to spot at higher speeds. If this is the case then you have ...

When at speed i tend to lose sight of the bottom it becomes very broken. Also the depth reading takes a while to record depth. What you are experiencing sounds like air bubbles crossing the face of ...

hummingbird 570.....after about 10 minutes of unit being turned on and fishing I've notice that the dept indicator is show .06 feet. Then after a minute or so it reads normal then starts reading .060 ...

Question about Humminbird Boating

1 Answer

hummingbird 570.....after about 10 minutes of unit being turned on and fishing I've notice that the dept indicator is show .06 feet. Then after a minute or so it reads normal then starts reading .060 ...

Question about Lowrance Boating

2 Answers

X135 in dash with shoot through hull transducer. It is not reading depth properly. Even when sitting still the depth may be correct but flashing and sometime stall. When running it doesnt read ...

Question about Humminbird Boating

1 Answer

383c no temp reading,even in simulator mode? replaced transducer already,still no temp reading... Try these steps: Got to setup and turn User Mode to AdvanceNow go to NMEA output and turn it to on ...

Not finding what you are looking for?
Boating Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Lowrance Boating Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Are you a Lowrance Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...