Kodak EasyShare One Digital Camera "focus dust" Questions

Camera Problem my camera states "Camera Error #E45" Hi, This error indicate that focusing ring got stuck or jammed. What you can try to do is spray some compressed AIR into the lens to try to free up ...

...I doingwrong? You may be doing nothing wrong, however the camera is either having trouble with the focusing circuitry/lens assembly, or you're not holding the camera still enough, with a solid ...

focus? Or is something else wrong with my camera? Do ALL digital cameras have this problem with dust? Do DSLR have same problem? How come these dust orbs only appear with Digital Cameras, and not film

focus (blurry)? Answer : This problem can occur for one or more reasons. Here are some common causes and suggested solutions. The lens is dirty. Use a soft brush to remove dust and dirt. Wipe the lens

...dust or other directly on the lens. Press the picture button hallfway down in order for the picture to be in focus. If all other fails: Repair Contact KODAK: ...

...on a 10 megapixel camera's sensor. One of the sensor's has stopped responding to light focused on it by the lens. Depending on how it failed, this will appear either as a sharp, black

dust and sand. Turn the camera on and it should function fine.s 3) Try forcing the camera lens: Turn off the camera. Place it on the back with the lens facing up and take a look at the spacing between

...dust and sand. Turn the camera on and it should function fine. 3) Another method is to tap the padded USB cover part on a hard surface, for example, a desk. It sounds so simple, but very often in ...

...its trying to open the shutter then it doesnt focus if i zoom in or out. there might be something in the lens. even a grain of sand to do that. try flushing it out with an air sprayer or dust

...dust, lint, etc. get inside the assembly, it can get stuck, and fail to turn, and focus. This is the most common scenario, although other things can be wrong. You can try two things: 1. Get a can of ...