Linksys BEFSX41 Router (DHBEFSX41) "sync modem" Questions

modem. These lights indicates sync on most modems. There are also modem/router combo devices, meaning these devices works as a modem and a router. Usually, for these devices, sync indicator is labaled

...router and wait for it to sync with modem (1-2) mins Turn on PC. It sound like your Router and Modem lost sync with each other. You must wait until devices sync and you must do in in the order

Netopia 2241 Modem losing sync? Can you help? If your modem is losing sync with ADSL 2 that means that your line has a problem. Try having your DSL provider move you to a new Cable and pair.

...srp 500 modem will not sync to adsl the modem will not sync - data light flicks on for a second then goes dark. It's not a dsl modem. Read the sheet. SRP500 Series Services Ready Platforms Data ...

...modem sync up. 3. Turn on your PC Your cable modem will remember the MAC address of the last device that was plugged into it, which is why you must turn off your modem to clear out the modems

...modem to sync to the network. Once the modem is finished with its start-up, plug-in the power cord of the router and let it sync to the network. After the modem has completed its start-up, it should ...

sync my wireless router to my new modem Turn the new modem off. Turn the wireless router off. Turn the modem on. Wait 60 seconds for the modem to reset itself. Connect an Ethernet cable from the modem

...Plug in the modem, allow the modem to reset and power recycle. Once the modem has reset completely,connect the modem to the wireless router. This should re sync the devices and resolve your

...sync. Basically with the DSL led going completely off- that would point to a bad modem, however the fact that you have no sync otherwise indicates your DSL provider may need to service your DSL

...sync router with modem Turn off the modem (i am assuming you are using a cable modem. if it is a DSL modem, this will not work) and the router. Turn the modem back on and wait until all the LED's on ...