Linksys Wireless-G WRT54G Router "connection server failed dns error" Questions

...SERVER FAILED,, A DNS ERROR HAS OCCURED, i need help please a DNS server stands for domain name service. The DNS server translatesnames from IP addresses. The internet sees IP addresses such as ...

...connection failed but IP address obtained. My PS3 is telling me that it "succeeded" in obtaining my IP adress,but now its telling me that an error occured during communication with the server.This is ...

...connection with the server timed out" My computer connects to net with no problem, but when I try to connect my PSP, it'll connect to the router but when attempting to load a web page the message ...

...connection to the server timed out. 80710B23 - PSN is offline, or the PSN is too busy to respond. 80710D23 - Off the PS3 for a while (30 min) with the AC switch (not standby mode). 80029024 - "Could ...

...Server address automatically" and click OK.Click OK again to close out of the Local Area Connection properties. Restart the system if any changes were made to the configurations. Right-click on Local ...

...server ip address. 9. It does not arrive at the DDNS service which I set. Same issue in the TZO. 10. RIP seems unworkable, Can?t to enable this function. 11. If input ASCII value excluding 0-9 into ...

...DNS numbers at the bottom can be got from the numbers you wrote down early on when you just had the modem connected E.g. 207.147.239.12 207.147.239.200 Now click OK If you have more than one ...

...DNS numbers at the bottom can be got from the numbers you wrote down early on when you just had the modem connected E.g. 207.147.239.12 207.147.239.200 Now click OK If you have more than one ...

...DNS numbers at the bottom can be got from the numbers you wrote down early on when you just had the modem connected E.g. 207.147.239.12 207.147.239.200 Now click OK If you have more than one ...

...server provided by Google). Depending on your version of Windows, it can be in different places, but you're looking for IPV4 settings under networking in the control panel. If it still doesn't work ...