door lock/latch assembly (part number 8181700) to solve the problem. Disconnect power to the washer and open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at
Question about Frigidaire Washing Machines
...door latch assembly are broken. If one is broken, replace the door latch. If the door latch is ok, you might have to replace the door switch and the door latch. To replace the door switch you have to ...
door latch assembly, there is a manual release that you can use to open the door latch to see if the piece will come from free. The following link advises: http://www.fixya.com/support/r622155-kenmore
Question about Frigidaire Washing Machines
...door lock/latch assembly off the lip of the right side of the door opening. Remove enough of the door gasket to access the door lock/latch assembly behind the front panel. Remove the three screws ...
door latch wax motor so you won't have the R11 resistor burnt... With that said.. Maytag made the door latch assemby one complete assembly meaning that you cannot replace the micro switches, solenoid,
Door Latch has broken plastic tab I need to reset the door latch back into the door lock assembly or just buy the $50 replacement lock assembly. Or can anyone suggest any other solutions? I am having ...
Question about Kenmore Washing Machines
...door latch not closing after bellows replacement Hi, does the door seat fully or is it just not latching when door is fully closed? Possible that door lock assembly is bad. Try manually releasing the ...
...door latch got a DE error, then replaced the door latch assembly. It tries to lock, but will not engage. I also changed the pressure switch IE error because the water filled enough to blow open the ...
...door latch switch or the door open/closed switch mechanism isn't responding correctly. If the error occurred when starting a self-clean cycle, look at the door latch and switch before the door closed ...
door lock/latch assembly (part number 8182634) to solve the problem. Disconnect power to the washer and open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at
24 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions