Question about Xerox Phaser Office Equipment & Supplies
...printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure. for more ...
...printhead to it?s center position (so it can tilt forward)? 1. Check the process gearbox for obstructions or damaged. 2. Ensure the gears are correctly aligned and homed. 3. Verify the process shaft ...
Question about Xerox Phaser Office Equipment & Supplies
...printhead is stuck in the tilted position or is not able to tilt forward to the print position, due to problems: Has ink spilled ink around the printhead that prevents it from moving to its center ...
Question about Xerox Phaser Office Equipment & Supplies
...printhead tilt is not engaged, so it didn't tilt back properly or the printhead is stuck in the tilted position by the tilt lock arms. The process motor gear train getting out of sync can also cause ...
Question about Xerox Phaser Office Equipment & Supplies
...ink spills or obstructions. and Printhead Tilt Gears. The Printhead should move when pushed left or right. Is the area around the Printhead clean and unobstructed? Remove ink spills or
Printhead tilt gear) ■ Head Tilt Gear (disengaged from Process Drive train; arrows on left frame point to each other) ■ Wiper Assembly (bottom of travel) ■ Process Drive
Question about Xerox Phaser Office Equipment & Supplies
...printhead is stuck in the tilt position by the tilt arms. The process motor gearbox being out of sync can cause this error also. I've also seen the wiper assembly be stuck between the drum and ...
printhead is stuck in the tilted position, or is not able to tilt forward to the print position due to obstructions. Has ink spilled around the printhead that is preventing it from moving? (you should
Question about Xerox Phaser Office Equipment & Supplies
...Printhead. Set them in their home positions. 5. Does the X-Axis Motor drive the Printhead to its center position (so it can tilt forward)? if not Troubleshoot the X-Axis drive. Well hope this
printhead is not locked in the head tilt restraint spring. 7,015.43: The head tilt restraint spring is out of place. Troubleshooting Procedure Step Questions and Actions Yes No 1 1. Reboot the printer
71 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions