Question about Xerox Phaser Office Equipment & Supplies
...Control Board has failed. Its a faulty engine board, i have seen it before. Call 1800 807 472. Its the real oki office. Talk to a bloke called paul in the service dept at brisbane , he can help you ...
...OKI 9200/9300 series upon which the 2135 is based. There's way too much that can go wrong, but the killer is that nothing except the sensor is failing. Very frustrating! Chekc out my tutorial on ...
...OKI C7300 can you help? Unfortunately it's a Hardware problem. If you bought it from a dealer, contact them. Error 020 When an error has occurred in the controller board (CU) or the program Rom. ...
control board error.i dont think that it would be hard to change out.but the board price may deter you from fixing it. Considering it about 5 or 6 years old.here is a list of parts for your printer. I
Question about Xerox Phaser Office Equipment & Supplies
...is still there then with the age of the machine (getting on in years) it is better to replace it as the error refers to the cpu in the control board and that's expensive on older machines to
...PU unit fan motor 1. Is fan in PU operating? NO - Replace Fan motor. YES - Replace engine control board (K7N). 2. Error reoccurs after replacing fan motor. YES - Replace engine control board
...OKI, and was told one of two things has apparently gone bad: a DIMM (in slot 1) or the controller board. I removed the RAM, cleaned the contacts, blew out the slots (w/canned air), and reseated the ...
my oki microline 520 elite is showing alarm and the Character pitch of 15 is flashing This is a checksum error. I would suggest replacing the main control board
itself Error 002 is an cpu exception fault caused by a defective controllerboard (CU board) When replacing this board remember to replace the eeprom on the controller from the old board to the new one
Question about Xerox Phaser Office Equipment & Supplies
...started with no paper & had same symptoms. Thanks for the help! Hi. Could you please grade the phone support I gave yo. Thanks any suggestions ya you got a bad controller board, replace cert/oki tech ...
175 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
147 Questions
158 Questions