ISO; Envelopes: #10 Commercial, DL, and C5. Tray 3: 525-sheet Feeder (standard on DX) Same media weights and sizes as Tray 2. Tray 4: 525-sheet Feeder (optional) Same media weights and sizes as Tray 2
Question about Xerox Phaser Office Equipment & Supplies
...of printer), to Tray 1 (manual feed which you have to pull out the feeder for). Once going into the Printer settings and changing this, there has not been another issue. Try this and see if it
Question about Xerox Phaser Office Equipment & Supplies
...tray is jamming every few pages The paper feeder is operating every 4-7 pages and then jams. I have to clear the paper (from the front) and then it works for a few more pages and then jams. I can use ...
Question about Xerox Phaser Office Equipment & Supplies
feeder is not being detected. Lots of things can cause that. Loose grounds. A bad connection to the power board, A pinched harness, A bad Input output board,Electronics module, Going to be a difficult
...feeder tray from 6600 moving and need to remove feeder tray Hi Ed Walsh, When you say feeder tray, are you speaking of the document feeder tray, or the paper input tray? The document feeder tray is ...
...tray doesn't light up as an option. Easy fix. Turn the machine off, on the back side of the document feeder is one beige cable. Unscrew the two screws and disconnect the cable. Turn the machine on ...
Question about Xerox Phaser Office Equipment & Supplies
...Feeder (the front drop down tray). I have reset factory defaults .. deleted driver and reinstalled. when you send a print job to it, it beeps and says load MP feeder with letter. If you put paper in ...
...feeder roller wont work paper feed rollers wont feed paper through and also paper tray is empty prompt comes up when there is paper in the tray tried small amounts of paper and still says tray is ...
Question about Sharp Office Equipment & Supplies
...feeder tray copies work fine, main feeder does not print, makes odd noise When trying to make copies we have to use the upper feeder tray. The main feeder tray sends out a blank page and makes a ...
...for obstruction above the primary feeder tray, in the gear assemblies in and around the bottom of the printer and the tray, or around the paper sensor. (a small plastic lever in the front of the
345 questions posted
Usually answered in minutes!
436 Questions
262 Questions
152 Questions
147 Questions
158 Questions