Zebra LP 2844 Thermal Printer "line across labels" Questions

...line across the width of the label. It appears to be where the print head sits on the label before it prints. Like maybe the print head is heating up too soon and it leaves a line across the width of ...

across 2 lables. not sensing the black line on back of label roll. Monarch 9855 printer is printing across 2 labels. It starts on one label, but continues to the next. It appears to not be sensing the

...line across a label (left to right) and now most of the time it completely stops at that line and binds up the printer. It's like it is welding itself to the label at the line that goes across the ...

...line across the label. how do you get it from leaving this line on the first label. Have you cleaned the printhead recently? residual label glue and ribbon debris can build up on the printhead. It's ...

...it. If you can't get the line to disappear, you can rearrange the info on your label so that the void does not go across your barcode. Lastly, you can replace the printhead. Hope this ...

...a gap on every line. Do you mean that, have a vertical line across all the label? clean the prinhead, if still doing, the printhead needs to be replace, some elements from the printhead are

...to make sure you have direct thermal labels - regular label stock won't work. Just quickly scrape your thumbnail across the label, the friction will cause a black line if the label is direct

line or solid black box across the width of the label (assuming a 4" label). Any vertical white lines that show indicate elements that are not functioning. You could also put one label above the other

...line across all the label, need printhead replacement, but first clian the printhead and the rollar, then check if the length and the with is the correct from the driver, last solution, resect the ...

...line going across barcode FedEx Cannot read the Labels because the thin line cuts off part of the barcode at the very bottom.... You have a bad printhead that needs to be replaced. Bad dots on the ...