Zebra Z4M Printer "save permanent" Questions

...default values.  these values are active only until power is turned off unless you save them permanently in memory.  If the factory default values ...

...Take up' setting in printer settings, worked once but not anymore, it appears settings aren't being saved. I loaded defaults, then set it to Rewind, saved settings as Permanent and it ...

Is it possible for my Z4M printer to automatically rewind rather than going through the menu and manually setting it to rewind each time? It says saving permanent changes but I still have to change it

save in 'Permanent' mode Hello - I have 2 issues with the configuration settings: 1) On 1 of my 8 Z4Ms, when I send a print job with 4"x2" labels (with a print width of 104 0/8MM set on printer config

save permanent. You won't have a problem after that. If you do I would be checking the page setup in the software to make sure it fits the lables. I agree with Dustproof's suggestion regarding setting

...the label. backfeed is set to before but still no change. tried other backfeed settings, but nothing changes Adjust the tear position parameter. It will move in or out. Then save config

...until you get to media type, change from non-continious to continious using the upper config buttons. press setup and next to save permanent. Also you can download Z4Mplus user manual from

...save configuration Hi, I'm working with a Z4Mplus, but somehow it starts printing the labels incomplete. I'm trying to change the PRINT WIDTH configuration that is "099 7/8 MM" to "104 0/8 MM", but ...

zm400 media darkness settings get reset after printings lable from SAP The printer driver settings override the printer settings unless you tell the driver to use the printer settings. You can tell by