2007 Harley Davidson FLHRC Road King Classic "jiffy stand removal" Questions

...Vehicle Orientation Model Inches Millimeters Motorcycle Upright With Rear Wheel in Air or On Jiffy Stand Without Rider or Luggage FLHR/C, FLHT/C/U, 3/8-7/16 9.5-11.1 FLTR FLHRS, FLHX1/4-5/16 ...

...jiffy stand leg FIRST support the motorcycle with a suitable lifting device so it securely upright and level and the jiffy stand is able to move through its full range of travel, move the jiffy stand ...

...Jiffy Stand WWAARRNNININGG Block and support the motorcycle under frame to be sure that it is securely upright and level and so that the jiffy stand can be moved throughout its full range of travel ...

...Jiffy Stand WWAARRNNININGG Block and support the motorcycle under frame to be sure that it is securely upright and level and so that the jiffy stand can be moved throughout its full range of travel ...

...jiffy stand and anchor plate and pull the pin from between the frame tubes and then the jiffy stand and the pivot block will drop out together as one piece. To reinstall the jiffy stand put the pivot ...

...a 2005 harley sportster Get a jack made for motorcycles from someplace like Harbor Freight Tools. Put it under the frame, making sure it clears the Jiffy Stand. Jack it up and remove the Jiffy

...jiffy stand and need to know if i have to remove the pivot pin and take the stand out for change or can i do it while installed on the frame by removing the back bolt that sits in the jiffy leg? The ...

...a kick stand spring on my 2006 harley davidson ultra classic well the easy way is to jack up bike remove the nut jiffy stand slide it out hook spring slide it back in and tight nut hope this ...

...jiffy stand sensor on my dyna low rider from 2008 See below. Are you aware of this recall? Do you know if the bike has been checked? HARLEY-DAVIDSON MOTOR COMPANY Make / Models : Model/Build Years: ...

...jiffy stand and then remove the oil tank filler cap clean it off, reinsart it and then pull it out again and look at the dipstick tpo see where the oil is on the marking. DO NOT EVER OVERFILL BY EVEN ...