Microsoft Broadband Networking MN-500 Wireless Base Station (L21-00001) Router "ethernet light blink solid" Questions

...light states are: Power - Solid DSL - Solid Internet - Solid or flashing quickly when data is being transferred. Ethernet - Only on and flashing quickly if cable attached to it and an active ...

...Ethernet = When lit, this light indicates that the modem is communicating with your computer. This will be on only if you're using the Ethernet cable to connect the modem to your computer Wireless = ...

...light blinking means that the connection to your ISP is not working. Try unplugging/replugging the Ethernet cable in the top port (probably yellow and labeled "WAN" or "DSL" or something). Check the ...

...light is off, check the Ethernet wire's connection between your modem and router. May be it can be cause of Incorrect wireless network setup & configuration. Recheck and correct the Ethernet ...

...solid, not blinking) and all four ethernet port lights, despite nothing connected to any of them. Have gone through power cycle several times. Have tried restoring to factory settings. All to no ...

...light for the data (ethernet to router). The problem is that the internet light is completely blank. A weird thing is that I am still able to access the internet, with limited speed and stability ...

light blinks and i try to install the disk but when it gets to the last step it won't work because the internet wont work because i have the router plugged into the computer and the modem connected to

...Ethernet directly to my one pc, a laptop). However, after closer inspection, ONLY the power light on the netgear router comes on. After power cycling it (just unplugged the power cable for about 10 ...

...ethernet cords, so I have excluded this as the problems. At first (when the internet went down) the DS green light was blinking on the modem, now the online green light blinks constantly on the modem ...

Ethernet port labeled "connection to modem." 3 Soft-reset the router by placing a sharp object, like a push pin, into the router hole. Push inward and immediately release the button. The lights on the