Hitachi Travelstar 80GN 60 GB Hard Drive "jumper setting" Questions

hi where is the jumper to put the hard drive into slave position on a hitachi TRAVELSTAR HTS541080G9SA00 ? I cannot find it Many thanks best regards Hi There are no jumpers to set on a SATA drive ...

...jumper setting to make this a slave the drive doesn't show slave setting. This drive has a boot virus and can't repair with windows XP disk. When I scan drive the scan gets to 39% and then ends (Bad ...

...the Toshiba Tecra 8000 and the Toshiba Satillite 2210XCDS,, Thanks,Ray It should work without any jumper settings. If it fails to work then you can use a jumper to go for lower capacity option

...cable and provide power. You can then connect the drive to a regular desktop PC. You can set the jumper on the drive to make it a slave and hook it up on the same IDE cable as your primary hard ...

computer won't recognize disk drive. driver is up to date. Vista. Double check and jumpers on the drive first such as MS master, Sl slave, CS cable select and make sure it is not set to the same as ...

...cable is aligned with pin 1 on the drive and host adapter (see Figure 2 on page 6). Verify jumper settings. Review the instructions in this guide and in your host adapter installation guide. ...

...jumper setting on both hard drives. There is an old trick to get drives in a similar condition working again, if only for a short period of time, but I've never managed to do it successfully myself. ...

i have a HITACHI 60 gb hard disk. tried to install os but "cant find any hard disks" appears. i can see the disk in the BIOS also suse linux does not find the same. it is a toshiba laptop i am using. ...

jumper setting (Master, Slave or Cable Select). Then look again the rear side of the HD and u will see some pin that locate beside the power input of the HD, that is the jumper pin. Now set the jumper

...setting in the jumper area, which is between the data plug and the power plug on the back of your HDD. main thing that will cause drives to not work is 2 jumpers on the same cable and they both are ...