... What interface are you using... not the line input on the PC I hope as it is NOT balanced... it is Stereo input with UNBALANCED input. If you tie the mixer using a balanced to 1/8 inch balanced ...
...I have a laptop Karaoke system. I connect from laptop to 6 channel mixer to speakers. I use a stereo phono to RCA from laptop to mixer. I am experiencing a buzz coming through my speakers. I ...
...ipod to the speaker, its not loud The IPOD does not put out the line level and worse, the IPOD is stereo so you need a mixer to mix the L and R channels before sending them to the line level input ...
...gt;M-Audio-FastTrackPro USB->trs outputs 1/2->linein 11-12 of mackie 1202-vlz3. How can i get stereo sound out of the mackie? Use TRS to TRS balanced cables from the M Audio to the line in 11 ...
...1 & Main 2 output, can I connect both to 2 Amplifiers so I have four independent outputs or 2 Stereo outputs? Can I Use these two outputs + mon 1 & 2 and also the bridged output all ...
I'm running a tape player into one of the mic channels, then out the tape out; problem is any stereo presence is lost. Is it possible to run a 1/8" to RCA in the RCA in, route that to the level ...
When I route either the main stereo outs or the aux1 and aux2 outs to another power amp, often one of the channels does not work. Make sure you use BALANCED TRS audio INTERCONNECT cables.
...to my computer so i can record. I have a forge software. Any suggestion If you want to record in stereo, the quick and dirty way is to get a 1/4 inch stereo to 1/8 inch plug cable and go frrom the ...
just purchased the mg102c, must I utilize a balanced cable to hook up my JBL powered speakers. Yes... to get best noise performance use balanced TRS or XLR. ALSO power the speakers and this mixer from
one side is louder than other can you help If this is a stereo mixer, adjust the balance
7 questions posted
Usually answered in minutes!
124 Questions
35 Questions
24 Questions
14 Questions
