...for any rubbing of the voice coil. If you hear rubbing, then the speaker needs replacing OR re-coning. Sometimes the magnet breaks off the back of the speaker. Investigate this before further
with the Marshall gains low and get the clean sound good, then work on the gritty sound. The amp is voiced for a sweet clean sound - if you want grit'n'ball change to a 50w Marshall valve head and a 4
...acoustic guitar and a Shure mic cutting out. There would be a break in sound - both guitar and voice would go - and then it would all come back again! It was not the power source as the drummer ...
...is incomplete test. Sometimes the magnets break off the drivers rendering no sound. Sometimes the voice coil shorts and if you don't interpret the ohmmeter readings correctly you can overlook a ...
... and i don't know how to make the instalation, to get the best recording results, i'll be recording voices, guitars, keys, brass and drums. I would appreciate any advice, cause it's a simple matter ...
Question about Yamaha Music
...utility page that has the splits. I have had this get clobbered and caused an unwanted transposed voice to sound.. If you can find other combinations that cause the problem that would aid in ...
...manual about "splitting" the keyboard. This is usually done at F# and allows either a different voice or pitch for the lower section of the
Thanks for the information on cleaning the contacts. I had all of the screws out to day but could NOT get to the contacts. I do NOT want to break the plastic case so how do you get to the contacts? ...
some keys are not functioning properly and some of the keys have been breaking the chord rythms This repair is probably beyond the DIY class of repairs. Best to take to a shop for repair.
5 questions posted
Usually answered in minutes!
57 Questions
33 Questions
24 Questions