NetGear WGR614 Wireless Router "gateway ip" Questions

...gateway is the IP address of the router. Connect the computer to the router. Open the setup page of the router using the current default gateway number. On the setup page of tghe router, you will see ...

...ip use isp1 gateway isp2 source ip use isp2 gateway isp3 source ip use isp3 gateway configuration as follows ip access-list extended isp1 permit ip X.X.X.X 0.0.0.15 any ip access-list extended isp2 ...

...ip use isp1 gateway isp2 source ip use isp2 gateway isp3 source ip use isp3 gateway configuration as follows ip access-list extended isp1 permit ip X.X.X.X 0.0.0.15 any ip access-list extended isp2 ...

...Gateway is the ip address of your router. if you are trying to connect for internet than there will one broadbank adsl router and the ip provided for it must be entered in your gateway.e.g default ip ...

...ip use isp1 gateway isp2 source ip use isp2 gateway isp3 source ip use isp3 gateway configuration as follows ip access-list extended isp1 permit ip X.X.X.X 0.0.0.15 any ip access-list extended isp2 ...

Gateway IP address is. http://www.fixya.com/support/r4935363-determine_computers_ip_address After you have the IP address to your Gateway you will need to ping the address. If you need help doing this

...IPv4 and Default gateway. Regards Chiranjeet you can find your gateway ip address using the command prompt , if you want to check details about the ip address check it here

...you can still click "Use the following DNS server address" and set preffered dns to the gateway ICS ip. Or click "Advanced" and click Add under Default Gateways and add the gateway ICS ip

...the "default" line or the address 0.0.0.0 would be the gateway IP address of the router and likely the address used to configure it. For example: Internet: Destination Gateway default ...

...your IP gateway. Click on Start - Run and type cmd to open a DOS command box. When the Dos box opens then type ipconfig and then press Enter. The gateway is displayed along with other IP