Bushnell Falcon 13-3410 (7x35) Binocular "fixing double vision" Questions

double vision Hi, I have a Bushnell 13-2412 binoculars, the problem is double vision I'm assuming you have set the dioptre correctly for your eyes. Normally this is caused by a collimation error when ...

double vision. how do I fix this?I have wide angle 12 x 50 rokinon binoculars have repaired these before....have to be collimted...not the best bino for the buck, but would cost about 45.00 with ...

...a little double vision. Where can I send them to get them fixed and about what will it cost? Also one rubber eye peace does not adjust right. You need to contact the manufacturer for repairs and

...double vision You will need to send them off to Zeiss. The Conquest series are Nitrogen filled and sealed. It is not something the local optical shop can fix readily. Warranty wouldn't cover dropping ...

two tunnel visions I have two tunnels, when looking through. I did adjust the binoculurs, according to the width of my eyes. Which would seem to be an obvious fix. But, did not work. Objects, when ...

...double vision in my 10-x25 Cabela's wide angle binos? I believe they were dropped. If they are expensive binocs I would take them to a camera shop for a repair estimate. If they are somewhat ...

...double vision. It'll depend a bit on the root of the problem. You can get double vision from properly aligned binoculars if the optics are too far apart or too close, relative to the spacing of your ...

...double vision. Can this be fixed? Or is it better to get a new pair? I live in Boston, MA depends on what they cost. you did not list model or maker.sounds like they can be repaired , lenses have ...

...double vision thing. No wonder I got them at a decent price. sounds like alignment problem,dont know where your from but you should take to a repair shop. if your from u.s. you can check out my ...

...double vision. How to fix? Nikon Medallion 10 x 21.5 This is such a common binocular problem that I hope you don't mind me pasting my generic answer below. There's no point in re-inventing the wheel. ...