...I insert a DVD, the system gets stuck and it goes on reading. I have checked the drivers, Regional setting . etc. Buy still, it refuses to work. I hope I get a good solution to this peculiar
...to the BIOS screen. Go to the last page or the "SAVE" page and there should be a "set system settings to default" somewhere around the BIOS. Once that is choosen, reboot in safe mode and go to ...
...code no 39 Hi purushoth, So neither of the ROM drives are available, or just the one? Your jumper settings may or may not be correct; in some systems, even having the IDE cable placement and jumper ...
...the LG. I have the LG writer/ Reader and the other DVD Sony reader installed, is there a jumper setting I need to set to tell that there are 2 different. Help please If the CD drives are parallel ...
rear spkrs. wont work test tone does work If the test tone is working then it seems like the audio setting is set to stereo and not surround! Check audio settings!
jumper setting setting bkm-52x16 as a secondary drive and jumper setting, any advises?? I usually set all the drives to cable select and let the machine bios figure it out. However if you want to ...
...the dvd is on you should check the jumpers on the back of your new device and match it with the setting from your old cd. you have three options master , slave . or cable select (cs) you can only ...
...eg: loosey9 then open skype go to tools from the drop down list select options scroll to audio settings also video settings you can see the webcam there you can even take a snapsot also make
the cd/dvd drive is not recognized on HP Pavillon laptop. If you recently removed or changed a drive from one of the drive bays, you may have to make one fo the drives the "master' and the other the ...
someone played with the region settings and used up all the number of changes option. Now it says I can't set it because I exceeded the number of changes. I need it set on region 1 and it's ...
3 questions posted
Usually answered in minutes!
5 Questions
2 Questions