Tomtom GO 300 GPS Receiver "garmin comes shuts" Questions

...comes back on when the signal is restablished. It happens alot while driving in cities. Anybody with the same issue please help before I throw this thing out and buy a Garmin. It always seems to ...

Garmin display comes up and then immediately shuts down unless I hold the power button, even then it does not go any further with the display. Do I need a new battery or is this thing broken? try this

...garmin street pilot 7200. after a download gps will not stay on. it shuts off. i have treid your suggestion to press the button for 15sec. but nothing comes out as you mentioned. it still gets shut ...

...Garmin won't take a charge - shuts off almost immediately after I turn it on. The battery indicator shows that it is stuck at 1 bar - can't get it to charge any more than that. The battery indicator ...

Garmin 320 shuts down Driving along and unit shuts down. Press power button and it comes back to where it was but has many nuisance shutdowns for no reason. Batteries are fully charged I suggest you ...

my Garmin has shut off and will not come back on. I had to submit, via email, a warranty RMA request via Garmin Website. I have the same exact problem. This unit sucks!

...garmin active, unit will shut down then reboot if plugged into the car. just shut down if not plugged in and has to be turned on manually. comes back right back to where it left off. happens multiple ...

...resetting instructions below) TWO, let the battery die out! Waking up your c330... If you left your Garmin c330 on running the battery will have 1% life left. If you turn c330 back on again, it will ...

...using a USB data cable, if the unit comes on most likely all you need to do is go to www.garmin.com and run a software update off the webupdater. and also try holding the power button for 50-60 ...

...Garmin 305 Edge shuts off. Wont come on. Usually if I leave it for a week. I come back and it turns on and is fine. I usually always have to charge it after that. You have to soft reset it first, and ...