Directv HR10-250 DTV Receiver "power lnb" Questions

Ad

Question about RCA Televison & Video

1 Answer

...input socket , it is nor 13v neither 18v.now i want to know is this the hardware or software problem. please help. thanks in dvance. Hardware. Check the power source, the 18v is used only for the

Ad

Question about Philips Televison & Video

2 Answers

...to that IC. LM317/TIP42C control the switching of voltages that power up the LNB, you should be getting 14 volts for vertical channels and 18 volts for horizontal. Good Luck. no voltaje in ...

Ad

LNB itself. Images of LNBs Go to Bing homepage Disconnect the box from power and wait 5 minutes, it may reset the short circuit connection, if not check for shorts at the connections from the receiver

...LNB, just keep the power cable 2. turn the power on 3. keep pressing the power + channel buttons on the device (not the remote) keep pressing for 10 to 15 seconds 4. then you will see channel No. ## ...

...power problem with the receiver. The Dish Pro Plus LNB won't cause any issues with that receiver. If the receiver is plugged into a power strip or surge protector, try plugging it directly into ...

Question about Fortec Star Televison & Video

1 Answer

...LNB appeared to of went bad again. This time i measured the voltage to it and it was 33 volts instead of the recommended 13-18volts. if you take the cover off the receiver and look at the power board ...

Question about Philips Televison & Video

1 Answer

...power supply and follow it to anywhere near the LNB tuner circuitry. This type of IC is normally mounted on a heatsink. Lastly if you are a subscriber, give you satellite service porvider a call to ...

Question about DISH Network Televison & Video

2 Answers

power strips no matter how fancy they are, it has to do with the voltage pull off of the LNB, The LNB is the big white thing at the end of your dish. Chances are that your receiver has gone bad due to

Question about Hughes Televison & Video

1 Answer

...LNB power supply? The voltage is supplied by the power-supply through the RF/IF interface usually encased in a metal box on its own. Also without knowing the model number of your unit I cant help any ...

Question about Televison & Video

2 Answers

...LNB) and then hold the power button for 30seconds, then plug the LNB, video (HDMI/Scart), and power back in (in that order). Then the problem should be solved. If it isn't try running the first time ...

Not finding what you are looking for?
Directv HR10-250 DTV Receiver Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Directv Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Don Eagan

Level 3 Expert

714 Answers

ray gallant

Level 3 Expert

66184 Answers

Are you a Directv Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...