...amp's feedback circutis get confused when the load shifts. You might also have the speakers checked since they can have an intermittent that is popping the amps. If you happen to be using BERHINGER ...
...your PAN controls are all at 12 o'clock, it looks like you have popped one side of the power amp. Please read my tip on here about the HAZARD on the "A" channel of PMP powered mixers. ...
Question about Yamaha Music
Which outlet on the back of my Yamaha P-95 piano should l use to connect to an amp? My options are headphones, MIDl in and out and pedal unit and sustain Try MIDI Use the headphone jack . preferably a
no amp output.amplifier damage You will have to have it repaired. Also read my tip regarduing the PMP mixer/amps that if you use 1/4 inch cable plugs to speakers, the SLEEVE of channel A is hot, not ...
CAN I PLUG IT IN TO MY AMP Yes the output jack socket can be used either to: plug in a set of headphones for personal listening / practice to connect to an amplifier. The zoom pedals use either a mono
No power from amp outlets ..rest of mixer works fine The amp module has likely blown. Repairs can be exetensive within the module. Try cycling the power as there is an overcurrent sensing in the amps ...
crate three button foot swich how do you connect it to the amp The Fender Hot Rod Deluxe shows a 2-button footswitch as standard but I'm confused. This link shows it as connected to the amp via a mono
Behringer Europower PMP2000 Fuse keeps blowing when the amp is switched on. For goodness sakes do NOT replace the fuse... doing so causes more damage inside. Likely one of the power amps has shorted ...
Rockaverb 50 amp head. 1/4 inch plug tip broken off and stuck in 8 ohm socket. How do I open head & casing to remove tip. Are there any diagrams available online that show correct procedure. ...
4 questions posted
Usually answered in minutes!
192 Questions
108 Questions
85 Questions
69 Questions