Belinea 1930 S1 Monitor "input dvi vga error" Questions

DVI input of the monitor. Disconnect any other signal cables from monitor and switch on both devices (PC & monitor). Wait a while. Monitor checks its inputs and a activates digital DVI, because it

...DVI signal input. If you are certan you have done everything correctly but still see only "No Signal Detected" Your LCD Display may need replacement Loch Hime :-) Im trying to hook my toshiba laptop ...

...DVI) input in it. When i first purchased it I had it connected via DVI and it displayed 1440 x 900 perfectly at color 32bit. But recently it has become out of range when on 32 bit and worked fine on ...

dvi-d go to power save And the screen goes black I have tried disconnecting the cables (blue tips with 2 scrues) from both screen and computer. Computer is Try switching inputs manually via the button

...DVI No Input Signal Monitor is going to sleep. I have checked all of the cables, unhooked then and plugged back in but to no avail. ANY HELP GREATLY APPRECIATED!! if you have twisted od bent the cord ...

...input to DVI as I have a VGA cable running into a DVI adapter which then goes into the DVI input on the back of the PC. Been using this setup for more than a year now with no problems. my older ...

...INPUT , and then is made black and appear "Entering sleeping mode" . What I must do? Or for where appear that...Tyvm. Check that the Video cable (VGA or DVI) is not damaged, if you move it ...

If you another input on the monitor i.e. DVI try that with a different cable. If there is another output on video card try that. Mix them to test. trial and error. Odds are there are some smashed pins

...Input Not Supported" keeps rotating on my screen. I put it in safe mode but it does not remove it. And I cannot get quadplex to come up. What can I do? Just go to into the dispaly settings and change ...

...input not suported" Hi there! This usually happens when switching from a CRT to an LCD monitor. If your monitor is new and you are connecting for the first time, reconnect to the old monitor, set the ...