Cobra 148 GTL 120-Channels Base CB Radio "vdc" Questions

can you use the rechargeable pack with alkalines so long as you do not attempt to charge / Most AA rechargeable batt. or 1.2 volts D.C. alkalines AA or 1.5 volts D.C. so if your raido has say 8 ...

...cord for the rca co pilot 14t303? I've acquired this unit and have made a plug for the 13.8 VDC operation. Really need the ac cord / adapter. Can anyone help? just might have to make one up ...

how to read a 12 cal term vdc only meter What is the make and model?

...blue Pin 4 : Down (Up w/ 22K Ohm Resistor)-no connect Pin 5 : Ground-shield & red Pin 6 : +13.8 VDC-no ...

...to get a lot of static-looking for some possible solutions You may need a line filter for the 12 VDC into the unit. otherwise I would suggest looking for a broken

...Pin 4 : Down (Up w/ 22K Ohm Resistor)- no connect Pin 5 : Ground-shield & red Pin 6 : +13.8 VDC-no ...

...This radio should be connected to a power supply capable of providing anywhere between 12 ~ 13.8 VDC. Twenty volts is WAY too much. You may have cause significant damage to the radio if it was ...

Pin 2 : Receive Pin 3 : Transmit Pin 4 : Down (Up w/ 22K Ohm Resistor) Pin 5 : Ground Pin 6 : +13.8 VDC Magnum S9 Codes: Stock 1-Shield (ground) 2-Yellow (audio) 3-Red (transmit) 4-White (receive) ---

Transmitter Frequency alignment Step #1 of the alignment procedure mentions 2.6 VDC +-0.1. Where is this voltage measured? look I'm going to tell you now. If you have no idea where to measure the ...

Connecting a Cobra 29LTD to a Pyramid PS-3KX 13.8VDC Power Supply Hi. I'm very new to the world of CB radio and have a slight problem. I purchased a Pyramid PS-3KX 13.8 VDC Power Supply alongside my ...