Cobra 148 GTL 120-Channels Base CB Radio "lower rf output cb" Questions

How can I lower the dead key. that is controlled by the voltage going to the rf output finals on most radios... changing it from 8v to 5v makes the rf output lower..

...RF gain all the way up and leave it there. There is no need to turn it down unless you are trying to not hear any one far away at all or on a fox hunt. Sounds like an SWR (signal to wave ratio) ...

...RF feedback is similar to audio feedback in that some of the output re-enters the circuit in a place it doesn't belong or is designed.  RF feedback is a direct result of a poorly matched ...

...lower stages . AM , FM are perfect , all RF power outputs perfect , looks good on scope with generator but cant send 2-tone for ssb , mic sens is high but distorted , coukd it be that special ...

...output, or swing. Modulation. So even if you have a radio that has been peaked, on a meter that reads AVG, it will still read around 3 to 4 watts. And, if it has a swing kit in it, it will read even ...

...RF forward output. There are 2 versions of the radio, and both are listed as 510xl. If you are wanting to expand the freq's or add channels, then no, there is no mod for that radio. If your going to ...

lower watts 'but when i turn the watts up the meter drops and the radio shuts down? I can turn it off and back on and it works again till i try to turn the rf power up ' then it shuts down again ? you

rf output power, would like to lower low end dk to one half watt or one watt? 959 model gallaxy with one 1969 as final vr14 and vr18

...rf power it only makes 5 watts difference!!(45watts on high/40watts on low)has the variable power been turned up inside?and how to i put it back to standard(i.e 5 watts on low power?any help would be ...