Cobra 148 GTL 120-Channels Base CB Radio "29gtl" Questions

Ad

Question about Radio Communications

1 Answer

cobra 29gtl i have a cobra 29gtl with a uniden pc-424Ac board is that a good board and how would i go about peak and tuning the radio,and how many watts can get out of it go to cbtricks.com and youll ...

Ad

Question about Cobra Radio Communications

1 Answer

Cobra 29GTL Won't Transmit I've got an old Cobra 29GTL set up at home as a base unit that receives fine but does not seem to transmit. The red "ANT" light comes on when I key the mike even though it's

Ad

Question about Cobra Radio Communications

2 Answers

...The Cobra 29 is a 23 channel radio. The knob is misaligned with the selector switch. If this is a 29GTL or 29LTD it is a 40-ch radio, and there is a problem with the PLL, or the selector

Question about Cobra Radio Communications

1 Answer

...c20 and r46 same problem ( cobra 29 GTL) Hi, To my knowledge and depending on what board your Cobra 29GTL used, R46 is 47ohms dropping resistor after the switched 12V. Its output is then filtered by ...

Question about Radio Communications

1 Answer

cobra 29gtl.no tx no rx on am only has AM but could be a number of things.First,turn radio on,make sure its on CB not PA,turn squelch all the way to the left and RF gain all the way to the right. You ...

Question about Radio Communications

1 Answer

cobra 29gtl Cobra no trans or resive do you have power to the unit? check with a multimeter to see if you have power to the board.If you do then flex the board to see if the radio recieve comes on.If ...

Not finding what you are looking for?
Cobra 148 GTL 120-Channels Base CB Radio Logo

277 questions posted

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...