Garmin Emap GPS Receiver "satellite coordinates" Questions

...I don't know what model of GPS you have but if you can set your "home" location with the GPS after it has acquired a satellite lock, the coordinates should be displayed automatically for you. - ...

...device, you know it will automatically receive and lock in on the coordinates from at least three satellites if you move outside to a large cleared area, and power up. I could list all the steps to ...

...it may be worth a try. What I did is this: I turned on my Garmin at my house and let in acquire the satellites, I then went to the Tools menu and chose "Where Am I?" It should now display your ...

satellite signal. However, whenever I push the where am I button it's able to find my coordinates. try reset by holding down finger on bottom right hand corner of screen before you power up, and go to

...satellite. I use my GPS most of the time for a sport called Geocaching and so when I am given coordinates and don't find the thing I am looking for I so about a 30ft-60ft search around where my GPS ...

coordinates consider that your line of sight is not the problem then is say theirs a issue with eh unit and it may be defective. but try holding it outside the car a second like out the window and see

...recommend getting a unit with the "H" in the name. This means you'll get fabulous reception of satellites even under heavy foliage and in deep

...which is not serviced by ground stations, having WAAS enabled may degrade the signal from the GPS satellites. Try enabling or disabling this feature. To do so, acess the System Startup Page. On the ...

...coordinates on the position screen. Press "enter". Use the track pad to change the digits to match your current position. Place the GPS where it has a clear view of the sky and wait. If you have a ...

...antenna. In addition to resetting/restoring factory settings, you could try this: Tap on the satellite receiver bars (lower right corner of the screen). This should take you to Status Summary. ...