...discharge the CRT(picture tube) get the posion out.Take the tv back cover off.Take video board that connected to the CRT(picture tube) out.Plug it in,so u have a live current to the CRT(picture ...
...picture tube as the tube will recharge on its own somewhat. Always becareful when you handle the mainboard. The capacitors continue to hold a charge as well. Set the board aside for a few days or a ...
...picture tube? He may have caused some type of damage to the picture tube, but usually rainbow effects happen when magnets are present. Perhaps the ball became charged with a large amount of static, ...
the cap has been damaged by arcing. if damaged like cracks please change. when you remove the cap you must be aware of high voltage that is stored in the picture tube so you have to discharge it first
Question about Toshiba Televison & Video
...picture tube fault. ( More than 30,000Volts DC in micro ampere) If sparking is observed near the EHT red cable black cup, switch off TV. Remove cable Wait for few hours. Remove the suction cup, and ...
Question about RCA Televison & Video
...dls depending on the tech . dangerous to do without the knowledge ,picture tube need to be discharge before, try to seal to avoid accidental hi voltage discharge . if you need more help let me ...
...discharge sounds & wanted to check if these events are relevant They are very relevant because you might have a high voltage ark from the output transformer or a shorted picture tube,the ark or high ...
discharge the high voltage anode of the picture tube I have a tool that does this but it can be done with a big flathead screwdriver and a clip lead. Attach the cliplead to the screwdrive and then the
...to the CRT. Becareful when you pull out the board to rework it. You must discharge the picture tube. See discharging picture tube on "You Tube". Thanks for asking me. Matt of Martins TV
...discharge the picture tube to check/change the fuse? Hi No ,but make certain that set is unpluged from mains before removing back if you do have to removed the eht anode connector for any reason then ...
69 questions posted
Usually answered in minutes!
588 Questions
237 Questions
99 Questions
101 Questions
91 Questions