Jensen XA4150 Car Audio Amplifier "amp protected light" Questions

...Apr 24, 2013 - Uploaded by Nathan West My MTX 600xd amp light won't even come on. ... Red light comes on. ... one.. and some times it goes into protection... once I turn the car

...amp the red protect light stays on and it wont let my amp work and when you take out the fuses the red light goes off If the protection LED lights only after the remote voltage is applied (head unit ...

...amp seems to run , all the gauges light up but no power goes to my subs, on the back there are 2 lites that light up- one red and says protect and another that says power and is green. the protect ...

...amp powers on with protection light, try the following: Unhook all input RCA cables on the amp. See if that helps with protection light. With a DMM, measure the voltage going into the amp's power ...

...when all have been verified to be in spec. then the protect light goes out & the power light comes on. If the protect light stays on then a fault exists within it's circuitry. Cheers,

...light amp is bad and if you have no protect light continue to hook up each speaker one by one while amp is on till you get a protection light and that speaker would be the source of your ...

...again. If you still have a protection light your amp is faulty. Hopefully you have warranty . Please check speakers impedance .A thumbs up would be greatly appreciated if this answer is helpful to ...

...amp and the protection light is on. and i already have an amp in my car and i used the power and ground from that. and the amp that im trying to hook up the red protection light is on. the rca's and ...

...light remains on, the amp likely has blown output transistors. hey i have a 800 watt crunch amp..and i was listening to it and the sound left and the power led and protection led was lit..so i ...

...amp i noticed that the protection light is on! I checkd all wireing, its ok! Could it be that the protection light is on if sub isn't conected to amp? I just haven't conected my sub because i think ...