Kenwood KAC-9152D Car Audio Amplifier "washer" Questions

Ad

Question about Jl Audio Car Audio & Video

2 Answers

JL 500/1 loses power after 15 seconds I have a JL 500/1 mono, when i turn on the power, everything works fine, but after a few seconds, the power completely goes out. I checked all the fuses the first

Ad

Question about Rockford Fosgate Car Audio & Video

2 Answers

...problem, the spot on my trunk which I used as the ground was completely rusted up along with the washer and screw and ground terminal. I cleaned up the terminal, got new screw + washer but my amp ...

Ad

...any solid ground in trunk area , use a lug cripmed to the ground wire with a nut ,bolt and star washer , taking a ground oiff an exisiting bolt is always a good idea but the surface must be free ...

...from the switch to the tub. If the hose is disconnected or has a hole in it, or is plugged the washer will continue to fill with no shutoff. Hi I have a top loader that continues to fill up with ...

Question about MA Audio Car Audio & Video

1 Answer

When the rca cords are plugged into the amp it makes a constant low note. Once the rca's are disconnected the low note stops. What would cause this? You have a bad ground in most cases. Because of ...

Question about Jl Audio Car Audio & Video

2 Answers

my amp turns off when i turn it up, the low volt light comes on too. i have a 240 amp alternator amd a 800 amp kinetiks battery hooked up to it. im running 0 gauge wire for the power and ground and ...

Question about Kenwood Car Audio & Video

1 Answer

iwont turn on i got a 315 or 715 depends on which way you look at number got power to it wont turn on was working has a blaukpukt moldulator it hss power to it is there a fuse in back of radio i dont ...

Question about Kicker Car Audio & Video

2 Answers

when i put power on my kx 800.2 the red light comes on and thats it Hi. As an ex. kicker engineer I know these amps. pretty well. The amp. is in protection due to an internal short More than likely it

Question about Lanzar Car Audio & Video

1 Answer

...the amp as practical, scrape off the paint down to the metal use a oversize screw with a star lock washer and a ring terminal. Make sure that your power wire and ground are at least 8 gauge. Next on ...

e audiobahn a2150hcq amp and as soon as I plug in the RCA it kicks into protect and the plug in is loose what can I do to fix this I am Well Keith, this is Dan by the way =)  LOL  The fact ...

Not finding what you are looking for?
Kenwood KAC-9152D Car Audio Amplifier Logo

146 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...