hotmail.com If you disconnect the speaker wires from the speaker terminals on the amp and the amp still goes into protect mode, the amp probably has shorted output transistors. If that's the case, the
...one. Either way I would be greatful for any help. This is almost always caused by shorted output transistors. To eliminate other possible problems do the following. Disconnect all speaker wires ...
...hotmail.com is my email All fuses would be external. Check all of them. If all of the fuses are OK, you probably blew the power supply for that channel (and possibly the output transistors). You'd ...
...transistor /diode etc. Do you know where I can get the schematic for the Jensen 300 ? Thanks Jerry hagar3_99@hotmail.com I brought mine to the shop with the same thing yesterday. It was the fuse that ...
...to solving my problem Thanks, JIM How hot is the amp when it shuts down? your problem is that the transistors on the circuit board are shorting out on the back panel of the case. is the amp ...
...people. this fixed my Kenwood 9152D, and it has worked fine for many years after using this solution. if anyone has this problem and needs help with fixing it, email me at thadoggma420@hotmail.com ...
...people. this fixed my Kenwood 9152D, and it has worked fine for many years after using this solution. if anyone has this problem and needs help with fixing it, email me at thadoggma420@hotmail.com ...
146 questions posted
Usually answered in minutes!
202 Questions
203 Questions
165 Questions
149 Questions
119 Questions