Kenwood KAC-9102D Car Audio Amplifier "power supply manual" Questions

Ad

power supply or the amp modual. I need to know how to test these to find the problem. Thanks Nate If LED's or other indicators are lighting, then the power supply is likely OK. If nothing lights, then

Ad

Question about Behringer Car Audio & Video

1 Answer

...power supply and the amp modual. Thanks Are there lights or effects windows lit up? If so, the power supply is likely OK. If neither speaker is working, that is bad however make sure all your trims ...

Ad

Question about Pyramid Car Audio & Video

4 Answers

POWER SUPPLY, remove cover, Undo the two nuts, flip board over, and gently rock the 4700uf capacitors side to side. If they move more than 1/16th of an inch, chances are they are blown. Remove/replace

Question about Pioneer Car Audio & Video

2 Answers

...power light flashed on. Any ideas? This may have a different type of triggered turn on wire. On some of the older Pioneer amps (and maybe some new ones) the trigger wire would SUPPLY B+ TO THE RADIO ...

Question about Phoenix Gold Car Audio & Video

1 Answer

...power supply. it has 3 screw where i hook up the wires. now one screw says b-, the other says b+, and the one in the middle says power. now i kind of figure that the red positive power feed would go ...

Question about Kicker Car Audio & Video

1 Answer

...power supply line as per the manual and not on the inside and should be close to the battery or supply source. Any other fuses (model specific) are usually on the left side but it also includes self ...

Question about Pioneer Car Audio & Video

1 Answer

...power supply to the amplifier (sound will stop) when an abnormal condition occurs. In such a case, switch the power to the system OFF and check the connection of the power supply and speakers." ...

Question about Audiofonics Car Audio & Video

1 Answer

...power supply or amp may have a problem. Do you have the amp mounted to your sub box directly? You shouldn't. The vibrations from the bub will kill the amp in a short amount of time. If it is ...

Question about Power Acoustik Car Audio & Video

1 Answer

...POWER SUPPLY PWM CIRCUITRY FULL SELECTABLE CROSSOVER 3-WAY PROTECTION CIRCUIT TRI-MODE CAPABLE VARIABLE LOW PASS 40 HZ - 120 HZ VARIABLE HIGH PASS 150 HZ - 1.5 KHZ VARIABLE 18 DB BASS BOOST @ 40 HZ ...

...powered power supply that gives 12 to 14VDC at about 20 amps and connect to that. That is a lot of watts. It may be more cost effective to purchase an amplifier that operated directly from the

Not finding what you are looking for?
Kenwood KAC-9102D Car Audio Amplifier Logo

73 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...