Kenwood KDC-V7022 CD Player "remove radio face plate" Questions

radio face 2 I removed back cover of radio face to expose USB solder joints.3 I drilled a hole in the back cover of radio face over solder joints 4 I drilled a hole in front cover of radio behind face

radio that seems to have froze it's stuck on one station and volume control you can't turn either no time or anything on removable face plate but does play the one station...Manual says it has a reset

...radio with a face plate and don't know if i am putting it on right or what i am doing wrong it was in a used vehicle that i just bought I suggest some two sided sticky tape. Carpet tape , I thnk it's ...

...REMOVE THE FACE PLATE THERE SHOULD BE A RESET BUTTON ON THE FRONT OF THE RADIO PUSH THAT AND TRY AGAIN IF THAT DOESNT WORK THEN PULL THE RADIO AND DISCONNECT FROM POWER 4 A LIL BIT AND THAT MAY ...

radio in my truck. And I went to change the station and it kept on skipping through stations and it wouldn't stop, so I had to pop off the face plate and put it back on. Once I put the face plate back

...radio and just time to get another or can it be fixed? My player just died. There is not life at all, my first check was to see if a fuse had blown but that is not the case. Unit worked fine one day ...

...face of radio at the same time. The four dash lines ( . . . . ) should "disappear". Then using your remote enter your code. Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset ...

...remove power completey from the unit later on today, and if it still has issues I am returning it for a replacement ( Bought it form Best Buy) L8R while the radio is off and the face is up, push down ...

...remove face on radio plate need instructions on how to remove face plate. http://www.docs.sony.com/release/CDXRA700.pdf Manual States the following.... Press off, then up arrow button (bottom left ...

...on some surface mount resistors inside of the radio.  If you are good at soldering they should be on the right front of the radio, you will have to remove the cd mechanism to get to