Kenwood KDC-V7022 CD Player "remove dash radio" Questions

Ad

Question about Kenwood Car Audio & Video

1 Answer

...dash. Step 5: The radio is held in with four (4) phillips screws / 8 mm bolts. Remove the screw/bolts. Pull the radio forward. Unplug the antenna cable, and 2 white connectors from the rear of the ...

Ad

Question about Kenwood Car Audio & Video

1 Answer

...remove KDC-BT742U from dash to reset using tools provided? book is just not clear enough on this. There is no need to pull the radio from the dash to reset. There is a reset button above the aux in ...

Ad

Question about Kenwood Car Audio & Video

1 Answer

...remove the knobs and shaftnuts behind the knobs. to the right of the dash there will be a metal bracket attached to the radio and the body of the van. remove the bolt and disconnect the wiring and ...

Question about Pioneer Car Audio & Video

1 Answer

remove this radio from the dash. How do you release this radio from the mounting adapter. I am assumming it comes out of the dash from the front like the factory radio did. If it's been installed with

Question about Car Audio & Video

2 Answers

...THOSE CLIPS MIGHT BE HOLDING IT BUT MAKE SURE THEY ARE NOT HOLDING THE DASH DOWN BEFORE YOU TRY TO REMOVE THEM IF THIS IS HELPFULL PLEASE GIVE ME A GREAT RATING THANKS PJDADJ TAKE DASH OUT OF WV ...

Question about JVC Car Audio & Video

1 Answer

dash, and you'll see one more phillips screw. Remove this screw and pull off the plastic panel around the factory stereo. #5 Locate the metal tray under the factory pocket (below the stereo), and pull

Question about Clarion Car Audio & Video

2 Answers

...remove properly from dash . I am looking to properly remove a Clarion NZ409 receiver from my dash. My vehicle is a 2001 Ford Excursion LTD. The radio was installed into a aftermarket installation kit ...

Question about Car Audio & Video

1 Answer

Remove the old radio from the car, buy a radio installation kit and wiring harness and antenna adapter (if necessary). Wire the Clarion and adapter harness together, mount it into the dash kit and put

Question about Jensen Car Audio & Video

1 Answer

remove the unit from the dash? if im not mistaken i you have to pull your dash off then behind the dash you will have about three or four screws holding your radio in place after removing those screws

Question about Phase Linear Car Audio & Video

1 Answer

remove radio from dash I would like to know how to take this radio out of my dash?I want to replace it with a cd player What kind of vehicle are you attempting to remove the CD player out of?

Not finding what you are looking for?
Kenwood KDC-V7022 CD Player Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...