Kenwood eXcelon KDC-X679 CD Player "car radio standby" Questions

...radio in standby by toggeling through the src menu. once the radio is in standby hold the function button until the menu pops up, scroll through the menu till you find the AUX feature, and set it to ...

...mode and I cannot find it. Can you tell me how to get into standby mode before I press the DISP button? The standby mode is just having the radio turned off with the car or key turned on. That's

...on my radio. It goes from TUNER to STANDBY every time I press the button. Help! Your going to need to pull off the battery cable for about 2 to 5 minutes and see if this will reset the radio. Good ...

radio is in standby how do i change it? how do you take it off standby Please go to: http://search.aol.com/aol/search?&s_qt=sb&q=kenwood+kdc-hd545u+owner%27s+manual&tb_oid=07-01-2013&s

...car radio and can not set the correct time on the clock settings Instructions for setting the clock, in the supplied booklet just do not work. section 02 page 17, in the booklet, advise, to press ...

...mode. If I put a CD in it will play then stop, then play, then stop. If I take it out it is stuck on standby. Got any ideas? try either pressing the reset switch or disconnecting power to the

...radio is on standby and i am unable to get it to work the player says standby and i am unable to find a reset button or do anything to get it to work again Try checking all of the fuses in your ...

...car's battery and that is when the problem occurred. you may need to into the menu and turn the aux option back on. put radio in standby mode... press and hold menu button for a while then scroll up ...

Radio: I got in my car today and turned on the radio. When I pushed the SRC button only Standby, USB and Tuner comes up. Before Sirius radio also was there but now it is gone! What happened and how do

...standby?? thanks Hello Tim-----your radio has menu options that can be changed- one of these turns on your aux port. to access this GO TO www.kenwoodusa.com on the top of the page click on support ...